No announcement yet.

Hardware suggestion

  • Filter
  • Time
  • Show
Clear All
new posts

  • Hardware suggestion

    Brand new user here
    I would like to suggest that for a upgrade add in two 1/4" holes counter sunk from the bottom on the mounting plate with 14" spacing from the center line.

    The reason why my router table is attached to my table saw, with a home made extension top that instead of using slide bolts I put thread inserts into my table. This way I can screw in exact same position every time without having to fiddle around with tacks and bolts.

    that being said If I was to add in my own holes to the mounting plate will I void my warranty?

  • #2
    The hold down slots are great for people with premade or factory built tables. With a insert nut the placement is the same every time centered perfectly to the router bit and at the max distance available from the fence to the router bit.