Announcement

Collapse
No announcement yet.

Pocket Accuray

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bill Bulloch
    replied
    I found the problem.....It was the dxf file I was using. All's good.

    Leave a comment:


  • Bill Bulloch
    started a topic Pocket Accuray

    Pocket Accuray

    I made a pocket cut that was designed to be: x 0.5 and y 10.0 inches. The cut produced was x 0.464 and y 9.875. I also cut a profile cut that was designed to be: x 2.0 and y 14 inches. The cut produced was y 1.875 x 14 inches. Are these errors consider acceptable? I checked the couplers for both x and y and they are tight. Any advice? I have the HD5.
    Last edited by Bill Bulloch; 04-28-2020, 08:17 AM.
Working...
X