No announcement yet.

Controlling Router Speed

  • Filter
  • Time
  • Show
Clear All
new posts

  • Controlling Router Speed

    Just got an HD2 and am new to CNC machines. Still sorting out the basics such as is there any way to adjust router speed with a fixed speed router through the CNC machine itself. Pretty sure there isn't but just wanted to check. I use a PC with a fixed speed of 27500 and I would like to slow it down for certain bits or cutting paths. Thanks.

  • #2
    There is none that I know of, If you think about it, it is not possible there is no control interface for the router other than power, You would need a VFD to control the speed. You will need a different you can not do all your cutting at 27500 RPM's.