Announcement

Collapse
No announcement yet.

Problems with the wires and tubes out of the top of my shark spindle getting pinched

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Problems with the wires and tubes out of the top of my shark spindle getting pinched

    As my shark moves on the Z axis sometimes the wires get pinched by the gantry. I don't know if anyone else has had this problem but I found a solution. Using a old router body I attached to the top of the gantry keeps everything moving perfectly. See the attached pictures
    Attached Files

  • #2
    I just made sure that my electric and water tubes were arced high enough to stay out of the way. Then I ran them thru the drag chain on the gantry. No problems regardless of where the spindle is...

    Comment


    • #3
      Yep - high loop then thru the gantry.

      Comment

      Working...
      X