Announcement

Collapse
No announcement yet.

V-carve issue for shark II

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • V-carve issue for shark II

    I Have a Question about V-carve....

    On The Shark II, The Y axis is the long axis of the machine. Naturally I would like to machine my longer projects along the Y axis.
    My problem is: When in V-carve desktop, the long axis is the X axis, and I cannot find a way to rotate my project 90 degrees before I start working.

    So, I open a new file, put in my workpiece size... say X=6.0" Y=25.0" Z=.75"
    As soon as I put in the sizes, v-carve stands my project on end.
    hmmmm.

    anyone else run into this problem.

    I bow down to those with greater knowledge than myself... lol

    Pete
Working...
X