Announcement

Collapse
No announcement yet.

No power going to the control box

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • kbfarms
    replied
    A little confused/concerned that the safety switch hasn't 'worked' for 3 years - that being said, you're sure the safety switch is not engaged and the fuse is good and mounted correctly - call support. It sounds like your control box is dead. That switch inside the box you are referring to is almost certainly the voltage selection - 125/225.

    Leave a comment:


  • aroff
    replied
    just dbl checked
    make no difference on front red power button

    Leave a comment:


  • aroff
    replied
    front power button has been disable for 3 yrs

    Leave a comment:


  • kbfarms
    replied
    Are you absolutely sure the red emergency power button is not engaged - absolutely - like you engaged it and then disengaged it - ?

    Leave a comment:


  • aroff
    started a topic No power going to the control box

    No power going to the control box

    I have no power to the control box--nothing
    fuse is good, outlet is hot and even tried a different power cord
    only other this is a small little switch/breaker located on the side of the inside panel
    i says either 15 or a 25 not sure
    cant figure it out

    help please
Working...
X