Announcement

Collapse
No announcement yet.

CNCShark HD4 Gantry alignment

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Brandon Albritton
    replied
    Hello,

    Contact
    support@nextwaveautomation.com
    or call them at (419)-491-4520

    Leave a comment:


  • Al Allison
    started a topic CNCShark HD4 Gantry alignment

    CNCShark HD4 Gantry alignment

    My new HD4 gantry guide shafts are not in alignment with the aluminum bed. There is about 1/32" difference between the shafts when measured with an accurate square on the aluminum bed. One touches the square and the other has a 1/32 gap. This results in misalignment of the router and z axis. rastering paths show the misalignment in the x axis.

    Is there a way (with instructions, hopefully) to correct this misalignment?
Working...
X