Announcement

Collapse
No announcement yet.

Sensor

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Brandon Albritton
    replied
    We have two different Probe Accessories

    1. The digital duplicator (red tip) which can scan a 3D object
    2. The sense probe (large tip) which is a center finder for the material you are going to machine.

    You will need the duplicator for the project you want to do. If you already have it (note again it will have a red tip), then here are the instructions
    NWA_Digital_Duplicator_Apr17.pdf

    Leave a comment:


  • sudo
    started a topic Sensor

    Sensor

    The CNC Shark included a sensor that I have not been able to put to use because I really wasn't sure what I could do with it.

    Recently, someone asked me to so some inlay work on an electric guitar, and I thought I might be able to use the sensor. Can I use the sensor to map the surface of the electric guitar body to get the outline and all the pickup and volume knob holes? If so, how?

    Many thanks.

Working...
X