IMG_2227 resize.jpg I updated a toolpath and exported it with the wrong Post Processor, Arcs vs Laser. When I fired it up, the router head spun up and ripped the wire out of the controller and broke the connector apart, leaving the wires frayed out of the insulation case. The laser is an older 2 Watt unit with 5 wires I can see, White, Black, Purple, Red, and Green. Does anyone have a unit similar, with the same color wires, they can send me a picture of? I have a new plug connector arriving tomorrow and can repair it if I have the pin out for the wires. I did look to see what might have already been posted, but the wire colors of the picture I found do not match my unit. Thank you in advance!