Announcement

Collapse
No announcement yet.

Air Assist and Air Filtration

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Malcavian
    replied
    Thanks For the reply I will have to look into it, right now I am really just trying to get the whole thing figured out from imge to tool path to burn.

    Leave a comment:


  • chitchc2
    replied
    I posted in the project section a 3d part that improves the existing fan but if you want to cut I recommend adding the compressed air. My part takes a 4mm air line like you get in the Harbor Freight air brush kit. I’m able to quickly cut 1/8 material and with patience you can cut 1/4 material.

    Leave a comment:


  • Malcavian
    started a topic Air Assist and Air Filtration

    Air Assist and Air Filtration

    What is reccomended for air filtration and does the 7w require air assistto help prevent burn out like I have seen in some of the higher powered lasers?
Working...
X