Announcement

Collapse
No announcement yet.

Ready2Laser Raster Program

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ready2Laser Raster Program

    FIXED

    I used Ready2Laser Raster Program from NWA to take my graphic and get my TAP file. I loaded into the Shark and the laser does not fire. I can get the laser to test fire using the pendant.

    What do I have to do to get the laser to work? What am I doing wrong?
    Last edited by pjkoths; 06-17-2019, 11:52 AM. Reason: Fixed

  • #2
    What was the fix?

    Comment


    • #3
      I have had the same issue. I have discovered, by trial and error, that Ready2Laser Raster only engraves when the image is either comprised of, or outlined by, a dark rectangle. The actual contents of the image seems to play a lesser role. I have been using the "average" (as compared to the "absolute") setting. Try to enclose your image in a rectangle and see if this helps.
      Last edited by RJGeller; 02-06-2020, 06:39 PM. Reason: NEW READY2LASER PROGRAM VERSION- This behavior appears to have been corrected in the latest program versions. If you have not done so since mid January 2020, definitely go get the latest version and r

      Comment

      Working...
      X