If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I was trying to tighten the router mount screw and none of my allen wrenches, metric or imperial, will fit the screw head.
what type and size tool is needed?
The screws require a torx bit also known as a star bit. A T-27 fits perfectly but is hard to find locally, you can find them on line. A T-25 will work but could round over the holes in the screws because they seem to be a little soft.
I discovered today that they used both T_27 Torx and 5/32 hex screws on the unit I received. Makes no since to mix the 2 different screw types when making this CNC.
Comment