Yes, I discovered that also, T-27 and 5/32.
Strange
Bob
Announcement
Collapse
No announcement yet.
Screws used on Piranha
Collapse
X
-
I discovered today that they used both T_27 Torx and 5/32 hex screws on the unit I received. Makes no since to mix the 2 different screw types when making this CNC.
Leave a comment:
-
The screws require a torx bit also known as a star bit. A T-27 fits perfectly but is hard to find locally, you can find them on line. A T-25 will work but could round over the holes in the screws because they seem to be a little soft.
Leave a comment:
-
Screws used on Piranha
I was trying to tighten the router mount screw and none of my allen wrenches, metric or imperial, will fit the screw head.
what type and size tool is needed?Tags: None
Leave a comment: