Announcement

Collapse
No announcement yet.

Screws used on Piranha

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Screws used on Piranha

    I was trying to tighten the router mount screw and none of my allen wrenches, metric or imperial, will fit the screw head.
    what type and size tool is needed?

  • #2
    The screws require a torx bit also known as a star bit. A T-27 fits perfectly but is hard to find locally, you can find them on line. A T-25 will work but could round over the holes in the screws because they seem to be a little soft.

    Comment


    • #3
      DUH... I should have thought of the torx bit. Thanks, Bob

      Comment


      • #4
        I discovered today that they used both T_27 Torx and 5/32 hex screws on the unit I received. Makes no since to mix the 2 different screw types when making this CNC.

        Comment


        • #5
          Yes, I discovered that also, T-27 and 5/32.
          Strange
          Bob

          Comment

          Working...
          X