Announcement

Collapse
No announcement yet.

Controller Software Help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Controller Software Help

    I have a 2013 Black Diamond, still works as it did when new. I have a dedicated PC attached to it, nothing on it but the controller software, no internet capability. I create my files on another PC and bring them to shop on thumb drive.

    Went to cut a file and the controller software on PC comes up with a 0 for software and 0 for controller ID. Says I need to register, its not connected to internet so not an option. First question is I'm not sure why that happened all of a sudden.

    So I think it may be time to load up the controller software on a laptop instead and do it that way.

    When I go to download center and select controller for machine older than 2016 I get a page not found. So now I am at a loss as to what software I need to run this machine and where to find it?

    Thanks in advance
Working...
X