Announcement

Collapse
No announcement yet.

Pendant stuck at the first screen, continue button non responsive

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pendant stuck at the first screen, continue button non responsive

    Shark SD120 is stuck at the continue screen. I did the paper thing to the touch screen and recalibrated the touch screen. Reloaded the firmware, and calibrated the touch screen again. still not working, still stuck at the continue screen. What can I do?

  • #2
    Found the issue: I have the system on its own stand with wheels to allow me to roll it around the shop. I also hung the plate on two screws on the stand.(Lower right of photo) The issue was hanging the magnet from one of the two screws which shorted it causing the pendant to fail its POST. The fix was adding a third screw just for the magnet

    Comment

    Working...
    X