Announcement

Collapse
No announcement yet.

Virtual Zero via Pendant Instructions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Virtual Zero via Pendant Instructions

    I really hope that I've just over looked it - but is there instructions some where on using the virtual zero function using just the pendant? I don't have a computer in the shop and carry files via usb to the machine. Thanks!

  • #2
    Try this manual for the HD4, there's a section in there for virtual zero. Let me know if you have any questions!

    http://www.nextwaveautomation.com/do...al_Feb2017.pdf

    Comment


    • #3
      Link not valid

      Comment


      • #4
        Do we have an updated link?

        Comment


        • #5
          No update to this thread since 6/22/18... is NWA reading these and ignoring them?

          Comment


          • #6
            All of the current NWA manuals, for each of their products - can be found here - http://shop.nextwaveautomation.com/s....aspx?recid=13. There is a section in the HD4 manual that covers the virtual zero task.

            As with the Rockler site - www.cncsharktalk.com - not a lot of direct monitoring going on.

            Comment


            • #7
              The new link is https://docs.wixstatic.com/ugd/59d16...9c87e207a9.pdf Per the contents page the Virtual Zero instructions are on page 21. Two things I noticed. A: it is only good for files that have the center of the material for 0,0. B: Uses the touch plate and only takes 5 readings (center + 4 corners). There are probably additional instructions SOMEWHERE for using the probe since it is a choice in the pendant software, but whether it is the generic touch probe or a particular 3d mapping probe is unclear.

              Comment


              • #8
                I think we need a video on Virtual Zero with the Pendant. I follow the instructions in the manual, but it does not execute; it just leave me hanging there.

                Comment

                Working...
                X