Announcement

Collapse
No announcement yet.

4th Axis Diagonal Orientation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 4th Axis Diagonal Orientation

    I have a Shark 510 and wish to cut a spindle diagonally on the table. Neither the X axis orientation nor the Y axis orientation give me adequate length for the spindle. How to set the X and Y axis points and align the tail stock with the head stock. Also, using VCarve Pro choosing the appropriate Post Processor. The 3 options all seem to be Y wrap.
Working...
X